First Decade cnc1 unit pictures

[Walen 0]

I just installed this classic and noticed the terrible unit and building pictures in the sidebar. How can I restore the original images??? Thanks for your help.

[Procyon 0]

How do they look like in the first decade?

[Sonic 295]

Your not playing the original DOS version are you? They should like this for C&C Gold....

 

[Walen 0]

Your not playing the original DOS version are you? They should like this for C&C Gold....

 

I am playing The First Decade pack's version of the fist Command & Conquer game (Tiberian Dawn I think). I remember the unit pictures from the dos version and want them back, very, very much.

 

And btw, any tips on whether one can expect a 1.03 patch for TFD?

[Sonic 295]

I don't think your going to be seeing the TFD 1.03 patch anytime soon.

[Nyerguds 102]

I am playing The First Decade pack's version of the fist Command & Conquer game (Tiberian Dawn I think). I remember the unit pictures from the dos version and want them back, very, very much.

Then play DOS C&C.

[Walen 0]

This is becoming a modding help thread;)

 

Well I have found a program that can manipulate mix files and got the demo that has the old pictures. I have already managed to extract a sample minigunner picture (E1ICON.SHP) from DEMO.MIX but cannot find it's counterpart in CONQUER.MIX in TFD folder (or in any other .mix file). I seriously hope unit icons are not hardcoded there... I also tried simply adding the icon file to CONQUER.MIX, hoping it will overwrite the new icon choice, but it didn't work.

 

Generally I think the high resolution is fine, vga is a long dead technology. Cnc95 plays so much nicer than DosCnc. Only those pictures...

[Nyerguds 102]

actually my link just told you how to install DOS C&C...

 

The C&C95 icons are in deseicnh.mix, tempicnh.mix and winticnh.mix. They're separate icons for each palette to allow maximum use of the theater-specific colours in the rendered icons. Because they're theater sensitive, they're renamed from .shp to .des / .tem / .win

This means that if you want to replace the icons, you'll have to do it three times

 

You'll also have to double their resolution, since C&C95 icons are 64x48.

Also note that in C&C95 there's no way to make the colours adapt to the side's colour as they do in DOS C&C. They'll just always be yellow, even when playing with Nod.

 

And they'll look very crappy & blocky in the smooth C&C95 interface.

 

I made an addon to get DOS C&C on TFD. So if you don't mind the low game resolution, get it here:

http://www.cncworld.org/downloads/index.ph...egory&id=60

[Walen 0]

actually my link just told you how to install DOS C&C...

There was a link to a demo that contained original pics.

 

The C&C95 icons are in deseicnh.mix, tempicnh.mix and winticnh.mix. They're separate icons for each palette to allow maximum use of the theater-specific colours in the rendered icons. Because they're theater sensitive, they're renamed from .shp to .des / .tem / .win

This means that if you want to replace the icons, you'll have to do it three times

 

You'll also have to double their resolution, since C&C95 icons are 64x48.

Thanks man, it worked like a charm.

 

Also note that in C&C95 there's no way to make the colours adapt to the side's colour as they do in DOS C&C. They'll just always be yellow, even when playing with Nod.

Do the unit icons adapt? I have never noticed that, but again it was a long time sice I last played dos cnc. There is a single pic so this must change the palette, right?

 

And they'll look very crappy & blocky in the smooth C&C95 interface.

Surprisingly they do not look THAT bad or pixelous, only a bit blurred with the shiny high-res interface. I guess making the icon background brighter would help a bit.

 

I made an addon to get DOS C&C on TFD. So if you don't mind the low game resolution, get it here:

http://www.cncworld.org/downloads/index.ph...egory&id=60

Unfortunately it refused to work for me for unknown reasons, as I already said here. Anyway modding is a better solution for me.

 

Right now I have already swapped minigunner icon. There are quite a lot of icons so I'll think of a method of automating the process, but one way or another I should finish what I started sooner or later. I could provide the results then for someone else to use.

 

And btw, do you know of any way of capturing game screen by any chance? There is something messed with palette change (8-bit <-> 16-bit) when the game is running, so all programs return either almost black screen or quirky colours.

[Nyerguds 102]

Unfortunately it refused to work for me for unknown reasons, as I already said here. Anyway modding is a better solution for me.

Ow, I never saw that final response. Black screen with VDMSound usually just means you didn't get the sound settings right though... it's a classic mistake. Just compare the VDM settings with the settings in C&C's CONQUER.INI. Once they're the same, it should work.

 

Right now I have already swapped minigunner icon. There are quite a lot of icons so I'll think of a method of automating the process, but one way or another I should finish what I started sooner or later. I could provide the results then for someone else to use.

 

And btw, do you know of any way of capturing game screen by any chance? There is something messed with palette change (8-bit <-> 16-bit) when the game is running, so all programs return either almost black screen or quirky colours.

Yeah.. just press print screen ingame, paste the messed up screenshot in any editor that allows palette editing (I advise Paint Shop Pro) and then load the original C&C palette of the corresponding theater back into it.

 

Just make sure that, when loading the palette, you make it "Keep Palette Index". So definitely DON'T use the "match nearest colour" option, since that'll obviously screw things up.

 

Now, for that to work you need the C&C palettes in a palette format which the editor can use.

 

I THINK the Copy as PAL (JASC) option in XCC Mixer doesn't work though. But there are some other ways of getting the palettes:

-use XCC to convert some SHP file to PCX using the palette you need, and then open that PCX in your editor and save the palette from it.

-extract the palette and use some tool (like the one included in the old RAmix) to convert the palette.

-Get my JASC palettes for C&C1 here (file is prntscr_pals.zip)

[Walen 0]

I have completed the mod and it is available for download at PlanetCnC. If you think it is worthwhile to ul it somewhere else let me know.

 

 

I made an addon to get DOS C&C on TFD. So if you don't mind the low game resolution' date=' get it here:

http://www.cncworld.org/downloads/index.ph...egory&id=60[/quote']Unfortunately it refused to work for me for unknown reasons, as I already said here.

Black screen with VDMSound usually just means you didn't get the sound settings right though... it's a classic mistake. Just compare the VDM settings with the settings in C&C's CONQUER.INI. Once they're the same, it should work.

Oh my, of course it works.

 

Also note that in C&C95 there's no way to make the colours adapt to the side's colour as they do in DOS C&C. They'll just always be yellow' date=' even when playing with Nod.[/quote']Do the unit icons adapt? I have never noticed that, but again it was a long time sice I last played dos cnc. There is a single pic so this must change the palette, right?

Indeed, when I had run the dos version I recalled that the unit icons were yellow for GDI and red for NOD. I will propably reconsider making a special red version of the mod for NOD fans.

 

I also noticed some other differences between dos and 95 versions. In dos ver. it ticks when progress is made while building and the screen is shaken when something big is destroyed. Any way of restoring this?

[EdmundW 0]

Hi!

 

i have downloaded the file from cnc world, and i dont know how to get it to work. Ive extracted the files the the "C: Program FilesEA GAMESCommand & Conquer The First Decade" directory and i don't know how to play c&c in DOS version from there.

 

Please Help me.

 

Thanks.

[Nyerguds 102]

Tried readng the readme file included in the pack? :roll:

It's called "tfddoscc1eng-readme.txt"

[EdmundW 0]

I have read the readme file in the pack and it said to extract the files in your TFD folder. Ive done that, but I dont know what to do next. I've loaded up TFD and the DOS version isn't there to click on. And I have got the C&CDOS file bound with the VDMSound2.1.0. Also, when I try to run the C&CDOS file it opens then comes up with a black blank screen.

 

Thanks if you can help.

[Inferno 22]

You should extract it to your TFD/Command & Conquer folder.

[EdmundW 0]

It works now, thank you.